matte grade nickel and copper recovery calculations

Popular Searches




Cobalt extraction

Cobalt extraction refers to the techniques used to extract cobalt from its ores and other compound or Several methods exist for the separation of cobalt from copper and nickelThey depend on the concentration of cobalt and the exact composition of the used ore...

030309 Secondary copper production

030309 Secondary copper production 89 030309 Secondary copper production Process description Secondary raw materials such as oxide materials for example can also be processed in shaft kilns to copper matte or coarse copper Blister copper is produced from copper matte in the matte converter and anode copper is produced from this in the anode kiln...

Sulfide Ores

Low grade nickel sulphide ore of Mt Keith is known for its mineralogical diversity and metallurgical complexity The predominant nickel minerals in this ore are pentlandite, millerite with small amounts of violarite and heazlewoodite with other sulphides like pyrrhotite and pyrite in small but variable amounts...

Metallurgy

Metallurgy - Metallurgy - Matte smelting: The primary purpose of matte smelting is to melt and recombine the charge into a homogeneous matte of metallic copper, nickel, cobalt, and iron sulfides and to give an iron and silicon oxide slag It is done in many types of furnace on both roasted or unroasted sulfide feed material The reverberatory furnace is essentially a rectangular refractory ....

How to calculate grade and recovery concentrate?

How to calculate grade and recovery concentrate? Location: Home >>News >>Profession news In the process of ore dressing percentage, the percent of quality of a product obtained and quality of raw ore, known as the yield rate of product...

COPPER Copper production

The copper recovery efficiency is over 90 % About 95 % of , The blast or shaft furnace is well-suited for smelting high-grade, lumpy copper ore If only fine -3 of 11- , The reverberatory furnace dominated copper matte smelting for much of the 1900s, because it was...

Recovery of nickel and copper from high

High-grade nickel-copper matte is treated at Impala Platinum to produce nickel briquettes and copper cathod The remaining residue is separately treated for the recovery of platinum group metals The major portion of the nickel values is preferentially extracted in a first stage acid oxidation leach...

Nickel Ore processing

mix-flotation the copper nickel from the ore , then separate the low grade nickel and low grade copper concentrate from the mix concentration The nickel concentrate after smelting obtain the high-grade nickel matte , then use floation to separate the high-grade nickel matte 3 mix-priority flotation and recovery the nickel from tailings...

High Grade Nickel Concentrate

High Grade Nickel Concentrate Product Information High Grade Nickel Concentrate is used for the recovery of metal valu Vale Canada Newfoundland and Labrador Suite 700, Blaine Johnston Centre , characterized by retention of excessive amounts of copper in the liver, brain, kidneys and...

Metal Value per Tonne

You will find this explanation under the header How to Calculate the Cut-Off Grade, but in summary: 1% equals to 22 pounds How To Calculate the Metal Value per Tonne In the following table, I have created some examples for calculating the metal value, using the ,...

Nickel: smelting, producing

Nickel matte with a 70% nickel grade, procured from mines and smelters that we have a stake in, and mixed sulfide with a 60% nickel grade produced in Coral Bay, using the HPAL (High Pressure Acid Leach) process is used as raw material Production Process of Electrolytic Nickel...

Flotation of Nickel

optimum conditions for the flotation of nickel, copper and cobalt from a nickel-copper sulphide ore The parameters investigated include collector dosage, percentage solids, depressant dosage and pH The effects of these parameters at three different levels on the recovery of Ni, Cu and Co were investigated using an L 9 Taguchi orthogonal array...

Recovery of platinum

Jun 29, 1982· The recovery of platinum-group metals, gold, copper, and nickel values in the matte was about 98 percent The matte was dry ground in a laboratory ceramic ball mill for two days to yield a product containing 95 percent minus 200-mesh material, and was then subjected to the leaching operations as follows: First Stage Leach...

From Rock to Copper Metal

Oct 24, 2018· This video was sponsored by LastPass bitly/2OyIQLU I collect copper ore from an abandoned mine in California and extract the copper metal out of it t....

Recovery of nickel and copper from high

Recovery of nickel and copper from high-grade matte at Impala Platinum by the Sherritt process Hydrometallurgy, 3:135--1 51 High-grade nickel-copper matte is treated at Impala Platinum to produce nickel briquettes and copper cathod The remaining residue is separately treated for the recovery of platinum group metals...

Top